raspberry pi laptop
In my previous post, I put together my build of the Raspberry Pi Laptop, but was unhappy with the fact that my circuit board would be exposed, and there would be loose wires (mainly the USB cable) just freely arched over the Pi.
I decided I should cut a USB pass-through slot in the cover of my Raspberry Pi case, since the USB draped over the circuit board in a simple arc, and laid down very nicely by the HDMI port and USB ports.
So here’s how I did it…
In an earlier post, I wrote about my personal tech road map, and the first milestone on that was to build the Raspberry Pi Laptop out of my Motorola Atrix 4G Laptop Dock and Raspberry Pi.
I can’t take credit for this, as the project idea and implementation has been around for at least 2 years. However, I did make some changes to the steps I followed, and modified my Raspberry Pi case to make the circuit board a little safer.